ERROR CODE DETAILS 

If there is a problem with the Xbox360 The LEDs in the ring of light will flash in a particular pattern. The pattern itself leads some insight to the problem. Certain patterns will lead to numbered error codes which will provide further insight to the problem. The numbered error codes are described below their corrosponding LED code.

After reading this guide if you'd like to discuss the problems you're experiencing please feel free to message me.

CHECK BELOW FOR RED LIGHT ERRORS AND HOW TO GET YOUR SECONDARY CODE


4 RED LIGHT ERROR

- The AV / HDMI cable cannot be detected OR faulty AV / HDMI cable

3 RED LIGHT ERROR

- General Hardware Error

In order to get more information on this error i will need the following information

  • Xbox type - PHAT or SLIM
  • Motherboard type - XENON, ZEPHYR, FALCON, JASPER, TRINITY, CORONA
  • Hack type - FIRMWARE ONLY, JTAG, RESET GLITCH, DUAL NAND, DOCK 360 
  • Order number and information (IF FROM ME)
  • Secondary Error code - see below

2 RED LIGHT ERROR

- Overheating

contact me for informationon this fault

DO NOT EVER PUT YOUR CONSOLE IN THE FREEZER OR OUT IN COLD WEATHER ALWAYS LEAVE AT ROOM TEMPERATURE. NEVER WRAP IN A TOWEL OR HEAT WITH AN AIR GUN - NONE OF THESE WORK SO DONT BE FOOLED BY SILLY U-TUBE VIDEOS.

SECONDARY ERROR CODES

The specific type of hardware failure can be determined by a "hidden" error code to get this error code from your console please do the following

  • Turn on console and wait for your 1 or 3 red light error to display
  • Press and hold the sync up button (the small white one), while holding that button press the eject button.
  • The LEDs will now blink the first number in the code (as described below).
  • Release the eject button and press it again.
  • The LEDs will now blink the second number of the code.
  • Release the eject button and press it again.
  • The LEDs will now blink the third number of the code.
  • Release the eject button and press it again.
  • The LEDs will now blink the forth number of the code.
  • Release the eject button and press it again.
  • The LEDs will go back to the 3 red flashing lights.

You should be able to determine the difference between the 3 flashing lights and the error code lights by the rate in which they flash.

Here is how you interpret the LEDs to get the code number:

  • All four lights flashing - 0
  • One light flashing - 1
  • Two Lights flashing - 2
  • Three lights flashing - 3

This will give you a 4 digit code like 0001 or 0110 etc please contact me and give me your details and your code so i can let you know the fault with your xbox - i need the model and possible hack type etc as codes vary depending on your model of xbox e.g. jtag, firmware only, reset glitch etc..

1 RED LIGHT ERROR

- General Hardware Error

In order to get more information on this error i will need the following information

  • Xbox type - PHAT or SLIM
  • Motherboard type - XENON, ZEPHYR, FALCON, JASPER, TRINITY, CORONA
  • Hack type - FIRMWARE ONLY, JTAG, RESET GLITCH, DUAL NAND, DOCK 360
  • Order number and information
  • Secondary Error code - see below